Calculate GPA
By Country · Free · No sign-up

Australia GPA Calculator

Calculate your GPA on the Australian 7-point scale from each unit's grade and credit points. The 4-point equivalent is shown too.

  • Results update as you type
  • Runs in your browser — nothing is stored
  • Works on phone, tablet and desktop
Australia GPA Calculator
Enter each unit's credit points and grade
--
GPA (7-point)
Add a unit to see your GPA
4-point GPA
--
Credit points
--
Units
--

Most Australian universities report a GPA on a 7-point scale, from High Distinction (7) to Pass (4). Enter each unit's credit points and grade above to get your GPA; the 4-point equivalent used by some universities is shown as well.

The basics

The Australian GPA scale

Australian universities grade units as High Distinction (HD), Distinction (D), Credit (CR), Pass (P) and Fail (F or N). On the 7-point scale these are worth 7, 6, 5 and 4, and a fail is usually 0.

Not every university uses the same scale. Universities such as UQ and QUT use the 7-point GPA, while others, such as Monash, use a 4-point scale (HD = 4, D = 3, C = 2, P = 1). Some rely mainly on a weighted average mark (WAM) of percentages instead. The calculator shows both GPA scales.

The formula

How Australian GPA is calculated

A credit-point-weighted average:

Formula

GPA = Σ (grade value × credit points) ÷ Σ credit points

  1. 7-point values: HD = 7, D = 6, CR = 5, P = 4, F = 0.
  2. 4-point values: HD = 4, D = 3, CR = 2, P = 1, F = 0.
  3. Failed units stay in the average with their credit points, so a fail pulls the GPA down.
Step by step

How to use the Australia GPA calculator

Use your academic transcript:

  1. 01

    Add each unit

    Enter the unit name (optional), its credit points and its grade. Most units are 6 credit points; check your transcript.

  2. 02

    Include fails

    Add failed units with grade F / N. Leave out units your university excludes, such as ungraded passes.

  3. 03

    Read your GPA

    The 7-point GPA appears at the top; the summary shows the 4-point GPA, credit points and number of units.

Worked example

Worked example: one semester

Four units of 6 credit points each:

UnitCredit pointsGrade7-point4-point
Introductory Statistics6D63
Programming Fundamentals6HD74
Academic Writing6CR52
Business Economics6P41

7-point GPA: (36 + 42 + 30 + 24) ÷ 24 = 5.50. 4-point GPA: (18 + 24 + 12 + 6) ÷ 24 = 2.50.

Why it matters

Why your GPA matters in Australia

Honours programmes, postgraduate coursework and research degrees often set a GPA entry requirement, commonly 5.0 or higher on the 7-point scale. Scholarships and graduate employers may ask for your GPA too.

If you are applying overseas, say which scale your GPA is on ("5.5 out of 7"). A 5.5 on the 7-point scale is not the same as a 5.5 on a 10-point scale.

Tips

Tips

  • Check your university's rules on fails: a few give fail grades a value of 1 to 3 rather than 0.
  • Need a different scale? The GPA Scale Converter handles 4.0, 5.0 and 10-point.
  • Percentage bands vary slightly between universities; the ones in the table are the most common.
Common Questions

Frequently Asked Questions

Quick answers about the Australia GPA Calculator — how it works, what it counts, and how to read your result.

Multiply each unit's grade value by its credit points, add them up and divide by the total credit points. On the 7-point scale HD = 7, D = 6, CR = 5, P = 4 and a fail is 0 at most universities.

64+ Free Calculators

Need a Different Calculator?

GPA, CGPA, grades, percentages and planning tools for every grading system — all free, no sign-up required.

ESC