Calculate GPA
Pakistan Admissions · Free · No sign-up

Merit & Aggregate Calculator

Work out your admission merit from Matric, FSc and entry test marks. Pick a university formula (MDCAT, NUST, UET, FAST, COMSATS, GIKI) or enter your own weights.

  • Results update as you type
  • Runs in your browser — nothing is stored
  • Works on phone, tablet and desktop
Aggregate Calculator
Pick a formula or enter your own weights
--
Your aggregate
Weights are Matric / FSc / entry test.
Enter your marks to see your aggregate
Matric share
--
FSc share
--
Test share
--

Most Pakistani universities rank applicants by an aggregate, also called merit: a weighted mix of your Matric marks, FSc marks and entry test score. This calculator works out that aggregate for any formula. Pick a preset for MDCAT, NUST, UET, FAST, COMSATS or GIKI, or type in the weights from your university's prospectus.

The basics

What is an aggregate (merit) in Pakistani admissions?

An aggregate is a single percentage that combines three results: your Matric (SSC) marks, your FSc or other intermediate (HSSC) marks, and your entry test score. Each university publishes a weight for each part, and the weights always add up to 100%. Merit lists are sorted by this number, so the aggregate decides whether you get a seat, not any single exam.

The weights vary a lot between universities. Medical colleges under the PMDC give the MDCAT half the weight, NUST gives its NET 75%, and UET gives FSc 50%, which is more than it gives ECAT. The same student can have very different aggregates at different universities, so check each formula before deciding where to spend your preparation time.

If your full FSc result isn't out yet, many universities, including NUST, FAST and UET, use your FSc Part-1 marks instead. Enter the Part-1 marks with the Part-1 total. The formula works on percentages, so the result is still correct.

The formula

How to calculate aggregate from Matric, FSc and test marks

Turn each result into a percentage, multiply it by its weight, and add the three parts together.

Formula

Aggregate = (Matric marks ÷ Matric total × Matric weight) + (FSc marks ÷ FSc total × FSc weight) + (Test marks ÷ Test total × Test weight)

  1. Divide each result by its total. For example, 1010 out of 1100 in Matric is 0.9182.
  2. Multiply by the weight the university gives that part. With a 10% Matric weight, 0.9182 × 10 = 9.18 points.
  3. Add the three weighted parts. The total is your aggregate out of 100. Merit lists usually show it to three or four decimal places.
Step by step

How to use the aggregate calculator

Keep your Matric and FSc result cards and your test result handy:

  1. 01

    Choose the merit formula

    Pick your university from the list and the weights fill in automatically. If your university isn't listed, choose Custom weights and type the Matric, FSc and test weights from its admission notice.

  2. 02

    Enter your Matric marks and total

    Use the total printed on your result card. It is usually 1100, but some boards now use 1200. O Level students enter their IBCC equivalent marks.

  3. 03

    Enter your FSc marks and total

    Enter your full HSSC marks, or your Part-1 marks with the Part-1 total if Part-2 results aren't out yet.

  4. 04

    Enter your entry test score

    Type your test marks and the paper's total: for example 180 for MDCAT, 200 for NET or 400 for ECAT. Your aggregate and the share from each part update as you type.

Worked example

Worked example: the same marks under different formulas

A student with 1010/1100 in Matric (91.82%), 945/1100 in FSc (85.91%) and 72.5% in the entry test gets these aggregates:

FormulaWeights (Matric / FSc / Test)CalculationAggregate
MDCAT (PMDC)10 / 40 / 509.1818 + 34.3636 + 36.250079.795%
NUST (NET)10 / 15 / 759.1818 + 12.8864 + 54.375076.443%
UET (ECAT)17 / 50 / 3315.6091 + 42.9545 + 23.925082.489%
GIKI5 / 10 / 854.5909 + 8.5909 + 61.625074.807%

Same marks, a spread of nearly 8 points. FSc-heavy UET gives this student 82.489%, while test-heavy GIKI gives 74.807%. Strong board marks help most where FSc carries the weight. A strong test score helps most at NUST and GIKI.

Quick reference

Aggregate formulas of Pakistani universities

The weights these universities have used in recent admission cycles:

UniversityEntry testMatricFScTest
Medical & dental colleges (PMDC)MDCAT10%40%50%
NUSTNET10%15%75%
UET Lahore & ECAT universitiesECAT17%50%33%
FAST-NUCESFAST admission test10%40%50%
COMSATS (CUI)NTS NAT10%40%50%
GIKIGIKI admission test5%10%85%

Universities revise their formulas from time to time, so confirm the weights in the current prospectus. Some add bonus marks (for example for Hafiz-e-Quran). If yours does, add the bonus to your marks before entering them.

Why it matters

Why your aggregate matters

Public universities in Pakistan fill most seats on open merit. Every applicant is ranked by aggregate and seats go from the top down. Closing merits for popular programmes are often separated by fractions of a percent, so a small difference in marks can decide between two colleges or two campuses.

Knowing your aggregate early helps you plan. Once your Matric and FSc marks are fixed, the entry test is the only part you can still change. Work out how many aggregate points each test mark is worth and you know exactly what a few extra correct answers would do for you.

Tips

Tips for a stronger aggregate

  • Find out which part carries the most weight for your target university. At NUST one NET mark (out of 200) is worth 0.375 aggregate points. At UET one ECAT mark (out of 400) is worth only 0.0825.
  • Use the exact totals from your result cards. Entering 1100 when your board used 1200 changes your percentage and your aggregate.
  • Apply to more than one university. Because the formulas differ, a student with average board marks and a strong test score may rank higher at NUST or GIKI than at UET.
  • Keep a margin. Closing merits move every year, so aim a few points above last year's closing aggregate rather than exactly at it.
Common Questions

Frequently Asked Questions

Quick answers about the Aggregate Calculator — how it works, what it counts, and how to read your result.

Turn each result into a percentage, multiply it by the weight the university gives it, and add the three together. With the MDCAT formula (10% Matric, 40% FSc, 50% test), 90% in Matric, 85% in FSc and 80% in the test gives 9 + 34 + 40 = 83%. The calculator above does this for any formula.

64+ Free Calculators

Need a Different Calculator?

GPA, CGPA, grades, percentages and planning tools for every grading system — all free, no sign-up required.

ESC